Adaptive Engineering & Fabrication > EQUIPMENT > Dust Collector Cartridges

Dust Collector Cartridges

When dusty air enters the dust collector from a silo or surge bin, the air passes through a wall of filtration material, depositing any dust on the filter cartridge exterior.  After passing through the cartridge, the clean, filtered air is exhausted to atmosphere. After time the deposited dust must be removed from the cartridge walls. This is done through a quick pulse of compressed air traveling through a venturi to produce a shockwave which knocks the dust from the cartridge wall.

Standard construction for a dust collector consists of a carbon steel welded body, interior safety grid, tool free 22” x 40” hinged maintenance door, exhaust vent, lifting lugs, and AEF white exterior.  Cartridge cleaning is accomplished through an auto sequence reverse pulse timer housed in a NEMA-4 blow down enclosure. Cartridge condition can easily be monitored using the included pressure differential indicator.

OPTIONS / FEATURES

Dust Collector Cartridge Options

  • Selection of Different Filter Cartridge Materials
    • Polyester Felt
    • Egg Shell Surface
    • Tetratec
    • PTFE
    • High Heat Materials
    • And More …
  • Differential Pressure Switch or Transmitter
  • Broken Cartridge Detector
  • Explosion Protection
  • Carbon or Stainless Steel Construction
  • FDA Interior Epoxy Coating
  • Exhaust Fan
  • Custom Colors

DRAWINGS AND MEASUREMENTS

MEASUREMENTS

AEF Model Number Qty of Doors Qty of Cartridges Cloth Area Sq. Ft. Cartridge Length Body Thickness
DCC-09-27 1 9 243 43″ 10 GA
DCC-09-36 1 9 324 54″ 10 GA
DCC-16-27 1 16 432 43 10 GA
DCC-16-36 1 16 576 54″ 10 GA
DCC-25-27 1 25 675 43″ 10 GA
DCC-25-36 1 25 900 54″ 10 GA
DCC-36-27 1 36 972 43″ 10 GA
DCC-36-36 1 36 1296 54″ 10 GA
DCC-49-27 1 49 1323 43″ 10 GA
DCC-49-36 1 49 1764 54″ 10 GA
DCC-64-27 1 64 1728 43″ 10 GA
DCC-64-36 1 64 2304 54″ 10 GA

Ready to Get Started? Contact Us Today